Loading... Please wait...

5.0L BOSS 302 TI-VCT 4V Mustang Crate Engine - Street

  • Image 1
  • Image 2
444.00 LBS
Calculated at checkout

*Image is a representation of this item. Actual item may vary.


Cubic Inch / LTR's:
302 / 5.0
Ft. Lbs. Torque:
Cast Aluminum
Bore x Stroke:
3.63 x 3.65"
Forged steel
Upgraded sinter-forged connecting rods for improved strength
Forged aluminum
Aluminum, DOHC four valves per cylinder, variable intake, variable camshaft timing
Intake Manifold:
Throttle Body:
80mm Drive by wire
Fuel System Style:
Ford Racing
Air Filter:
Fuel System:
TK Stage 1

Product Description


Ford Racing's aluminum 5.0L Mustang Boss 302 crate engine takes the Ti-VCT 5.0L engine to the next level of performance with high flow CNC cylinder heads and revised intake to deliver 444 horsepower and 380 ft.-lb.+ of torque (with premium fuel). The lightweight aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength. For the track, the oil pan features a large sump 8.5 qt capacity with revised oil pan baffling for improved oil control under hard cornering.

  • 444 hp @ 7400 RPM
  • 380 lb-ft of torque @ 4500 RPM
  • High-performance 5.0-liter, four-valve Ti-VCT engine
  • Displacement 302 cu. in.
  • 3.63 bore x 3.65-in stroke
  • Aluminum block
  • Forged steel crankshaft
  • Upgraded sinter-forged connecting rods for improved strength
  • Forged aluminum pistons
  • Aluminum cylinder heads, DOHC, four valves per cylinder, variable intake, variable camshaft timing,
  • High-strength aluminum-alloy cylinder heads with fully CNC-machined ports and chambers for exceptional high-rpm airflow without sacrificing low-speed torque
  • Sodium-filled exhaust valves for improved heat dissipation
  • 11.0:1 compression ratio
  • Revised composite intake system with shorter runners, inspired by Ford Racing's Daytona Prototype engine program
  • 80 mm single bore "drive by wire" throttlebody
  • Includes manual transmission engine harness and flywheel
  • Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.
  • Engine weight: 444 lbs

Standard Items on ALL TurnKey Engines

  • Street Package Includes
    • Flywheel or Flexplate
    • Starter
    • Ceramic coated block hugger headers
  • Complete Accessories
    • Alternator
    • Water Pump
    • Serpentine Belt System
    • Brackets and Tensioners
  • Complete Ignition - 5-Wire Hook-Up
    • Coil packs
    • Spark plugs and wires
    • ECM with TurnKey calibration
    • Custom marine grade engine wiring harness
    • Uses all OEM connectors
    • Electric fan controls
    • Fuse block and relays
  • Complete Detail Package
    • Engine oil and filter
    • K&N air filter
    • Hardware kit
    • Motor mount bolts
    • Oil temperature sending unit port
    • Water temperature sending unit port
    • Engine covers
    • Drive by wire throttle body
    • Installation guide
  • Complete AN Fitted Fuel System
    • EFI fuel pump kit
    • AN fitted fuel rails
    • Pre-filter
    • Post-filter
    • Fuel pressure regulator
    • AN-6 & AN-8 fittings
    • O-rings & crush washers


  • AC $600
  • Power Steering $400
  • Chrome Retro fit kits for all early vehicles
  • Engine Covers
  • Custom Paint
  • Motor Mount Kits
  • Full Length headers
  • Oil Pans

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Our Newsletter